MERMAID M24 COOL AND REVERSE CYCLE A/C UNIT - 24,000 BTU'S - 220V

$1,750.00

  • Brand: Air Conditioning
  • Product Code: AXB01119GPL
  • Availability: In Stock
  • Ex Tax: $1,750.00

Mermaid M24 Cool and Reverse Cycle Unit - 24,000 BTU's - 220 V 



Newest to the Mermaid Manufacturing line is the M24 – 24,000 BTU model marine air conditioner. Due to Mermaid customer demands, the M24 was created to solve the problem of locating a self-contained unit where performance, price, and efficiency were hard to find with an output larger than 16,500 BTU’s.

With a cooling capacity of 2,400 cubic feet, Mermaid's 24,000 BTU unit is designed to cool over 40′ cruisers and over 45′ sailboats. 

Constructed on Mermaid’s standard stainless steel base with dual condensate drains, the M24 is an ideal addition to any vessel looking for maximum performance and durability – all in one package. The M24 is available in Right, and Top air discharge configurations and only comes in 220V. The air output collar holds an eight inch duct. It is recommended to use at least three vents on this unit – minimum sizes of 6 inch vents. Mermaid provides eight inch ducting and air splitters to take eight inch to multiple six inch vents. 

All M24 models include a digital thermostat, insulation mounting pad, and air output collar. Pump not included.  

With Reverse Cycle Heating 

With reverse cycle heating in a marine A/C unit, a reversing valve reverses the flow of freon. Normally the evaporator / fan blows cold into the cabin while the condenser expels the heat into the water. When reversed, the evaporator / fan blows heat into the cabin and the condenser expels the cold into the water. Unit BTU ratings are based on it’s cool mode. The reverse cycle heat mode produces 10-15% more BTU’s than the unit does in cooling mode.

 

Digital Control/Thermostat Options (Included w/Unit) - Select Programmable or Non-Programmable 

Programmable Thermostat

Mermaid’s standard Digital Programmable Thermostat. Designed to be used with any Mermaid unit. 

Programmable features allow for weekday and weekend setting for those boater’s who care to use the unit for dehumidification or simply climate control while not on board. The thermostat is also accompanied with 20 feet of four-wire thermostat cable and installation instructions.

Dimensions: 4 1/2″ length x 1 1/4″ width x 3 1/4″ height


Non-Programmable Thermostat

As an alternative to the standard Digital Programmable Thermostat, Mermaid offers a simple Non-Programmable Thermostat that can be mounted vertically or horizontally. It is ideal for applications where programming features will not be necessary.

Simply turn the unit to HEAT or COOL, set the fan to AUTO (comes on with the unit) or ON (continuous duty), and set your desired temperature – and that's it! The thermostat will now maintain that set temperature until you turn it off or change the temperature. Again, this item is ideal for folks looking for a simple controller and a slimmer wall mount design. This can be a FREE alternative to your Programmable Thermosat upon purchase of any Mermaid Air System. 


Dimensions: 4 5/8″ length x 7/8″ width x 3 1/4″ height

 

Technical Specifications

ModelM24
Cooling Capacity24,000 BTU's
Voltage 220 V
Running Amperage11.4 A
Unit Length23 inches
Unit Width 17 inches
Unit Height 16.75 inches

Write a review

Note: HTML is not translated!
    Bad           Good