MERMAID M16 COOL AND REVERSE CYCLE UNIT - 16,500 BTU'S - 110V

$1,265.00

  • Brand: Air Conditioning
  • Product Code: AXB01098GPL
  • Availability: In Stock
  • Ex Tax: $1,265.00

Mermaid M16 Cool and Reverse Cycle Unit - 16,500 BTU's - 110V 



With a cooling capacity of 1,400 cubic feet, the Mermaid 16,500 BTU Marine A/C unit is designed to cool / heat up to a 40′ cruiser or a 45′ sailboat. 

The Mermaid M16 – 16,500 BTU system produces phenomenal climate control to vessels. Manufactured on high grade 304-18 gauge stainless steel, this unit was engineered with your comfort in mind. This unit is available in Right, Left, or Top air discharge configurations. Mermaid recommends at least three discharges for this unit. One 8″ x 6″ grill should be within 6 feet of the unit and at least two other discharges need to be at least the 4″ round supply vents.

Includes a digital thermostat, an insulation mounting pad, and an air output collar. Pump not included.
 

With Reverse Cycle Heating 

With reverse cycle heating in a marine A/C unit, a reversing valve reverses the flow of freon. Normally the evaporator / fan blows cold into the cabin while the condenser expels the heat into the water. When reversed, the evaporator / fan blows heat into the cabin and the condenser expels the cold into the water. Unit BTU ratings are based on it’s cool mode. The reverse cycle heat mode produces 10-15% more BTU’s than the unit does in cooling mode.

 

Digital Control/Thermostat Options (Included w/Unit) - Select Programmable or Non-Programmable 

Programmable Thermostat

Mermaid’s standard Digital Programmable Thermostat. Designed to be used with any Mermaid unit. 

Programmable features allow for weekday and weekend setting for those boater’s who care to use the unit for dehumidification or simply climate control while not on board. The thermostat is also accompanied with 20 feet of four-wire thermostat cable and installation instructions.

Dimensions: 4 1/2″ length x 1 1/4″ width x 3 1/4″ height


Non-Programmable Thermostat

As an alternative to the standard Digital Programmable Thermostat, Mermaid offers a simple Non-Programmable Thermostat that can be mounted vertically or horizontally. It is ideal for applications where programming features will not be necessary.

Simply turn the unit to HEAT or COOL, set the fan to AUTO (comes on with the unit) or ON (continuous duty), and set your desired temperature – and that's it! The thermostat will now maintain that set temperature until you turn it off or change the temperature. Again, this item is ideal for folks looking for a simple controller and a slimmer wall mount design. This can be a FREE alternative to your Programmable Thermosat upon purchase of any Mermaid Air System. 


Dimensions: 4 5/8″ length x 7/8″ width x 3 1/4″ height

 

Technical Specifications

ModelM16
Cooling Capacity16,500 BTUs
Voltage 110 V
Running Amperage13.50 A
Unit Length19.75 inches
Unit Width 13.50 inches
Unit Height 13.75 inches

Write a review

Note: HTML is not translated!
    Bad           Good