MASS COMBI 24/2600-60 (230V) - INVERTER / CHARGER

$1,500.00

  • Brand: Battery Chargers
  • Product Code: AXB01341GPL
  • Availability: In Stock
  • Ex Tax: $1,500.00

Mastervolt Mass Combi 24/2600-60 (230V) - Inverter Charger

The exceptionally reliable Mass Combi series offers a lot of power at a highly competitive price. In addition, the four models are also available in two customer-friendly variations with remote control or MasterBus.

The powerful 3-step+ battery charger guarantees maximum battery life and can simultaneously charge two battery banks. The inverter with high peak power starts even the heaviest loads. A built-in distribution system switches between grid and inverter power, while two separate AC outputs allow users to connect critical loads to a preferred group.

Key Benefits

  • Compact, lightweight and no hum thanks to HF technology.
  • High yield and more power from your batteries.
  • Intelligent 3-step+ battery charger with low DC ripple current for fast charging times and long battery life.
  • Charges two individual battery banks simultaneously.
  • Quiet, powerful inverter with 200 % peak power.
  • Power Assist: prevents blown fuses.
  • Pure sine wave energy prevents failures and damage to sensitive equipment such as adapters.
  • Dual AC outputs to separate critical equipment from heavy loads.
  • Higher yields possible via parallel switching (only for 2200 and 2600 W models).
  • Professional connections ensure fast installation and operational security.
  • CE approved and E-marking for mobile applications.

 

Technical Specifications

Specifications sine wave inverter
Nominal DC voltage24 V (19-31 V)
Output voltage180-250 V (adjustable) 50/60 Hz (± 0.05 %)
Output waveformtrue sine
Continuous power at 25 °C / 77 °F, cos phi 12550 W
Max. peak load4000 W
Max. efficiency≥ 90 %
Max. ripple on DC (battery at full load)< 5 %
Energy saving mode consumption0,5 W
Parallel configurationyes, up to 2 units
Synchronise with mains/generatoryes
DC consumption at 230 V< 9 W
Specifications battery charger
Input voltage range180-265 V
Max. charge current at 25 °C / 77 °F60 A at 28.5 V, adjustable
Primary AC consumption (full charge)8.5 A
Secondary charger output voltage24 V
Secondary charger output current5 A
No-load power consumption on AC< 15 W
Battery temperature sensoryes, included
Battery voltage senseautomatic compensation
Specifications transfer system
AC input 150 A (25 A switched, to short break output)
AC output 125 A (short break output)
AC output 250 A (power output)
AC input fuseyes, resettable
Transfer speedsemi-seamless (10 ms typical)
Transfer voltage range180-265 V
Transfer frequency range45-65 Hz
General specifications
Display/read-outLED display
Dimensions, hxwxd496 x 318 x 156 mm
19.5 x 12.5 x 6.1 inch
Weight11 kg
24.3 lb
ApprovalsCE, ABYC, E4, RMRS
Technical specifications
Charge characteristicIUoUo, automatic / 3-step+ for Gel/AGM/MLI/ flooded/spiral/traction
Max. current power output50 A
Max. current shortbreak / inverter output25 A
Recommended battery capacity~ 120-360 Ah (based on gel batteries, may differ for other types)
Ground relayyes, configurable
Temperature range (ambient temp.)-25 °C to 60 °C, derating > 25 °C
-13 °F to 140 °F
Coolingmaintenance-free vario fans
Protection degreeIP23 (vertical mounting)
Safety classIEC protection class I
Humidity protectionconformal coating, max. 95 % relative humidity, non condensing
Protectionsover temperature, over load, short circuit, high/low battery voltage
Power Assistyes
MasterBus compatibleyes, in combination with a MasterBus Combi Interface (product code 77030475)

Write a review

Note: HTML is not translated!
    Bad           Good